What are the causes of sealant blockage

First of all, let's talk about how to install sealant on the glue gun: first of all, hold the handle with one hand, push the spanner forward, and fully open it;Then pull the extrusion rod backwards, and when it is completely pulled out, the sealant can be loaded into the card slot of the glue gun;Then adjust the extrusion rod to fit the bottom of the hose, so that the installation is complete.Isn't that easy?

Have you encountered any other problems since the installation? For example: ceramic tile sealant is difficult, or directly not out of the material, why is this?

1. The most common reason is that the nozzle is blocked by the solidified tile adhesive .At this point, we can only replace a new nozzle.

2.Sealant is greatly affected by temperature. Generally, when the temperature is too low in winter, the colloid will become stiff and sticky, and it will also cause the problem of difficult gluing.At this time, we can use warm water to properly warm the sealant.

3. The small opening of the glue nozzle will also lead to the difficulty of gluing, so the construction of sealant is a physical job, and it is not easy to try without absolute ability.

4. If the pressure control knob of the glue gun is too small, it will also cause that the glue gun cannot be fired. You can slowly rotate the knob to the maximum along the direction of the "+" sign and re-test the gun.

5, Glue gun quality is not good.If it is an inferior glue gun, the pressure of the glue gun is not enough and how can it be effortless?So a good glue gun can let us save a lot of effort in the construction.

Kelin epoxy gap filler manufacturer has been providing customers with quality service, professional construction team dedicated service for you, embellish your life, make your house more beautiful.