The details that need to be paid attention to in the construction of grouting

Tile grout construction is not difficult, many owners want to buy their own tile grout to go back to construction, but some owners do not understand the construction method of tile grout, directly ignore a lot of details. What should be paid attention to in the construction of tile grout? Kelin epoxy grout supplier takes you through how professional construction works.

1. Clean up both sides of the gap: a lot of people just clean up the impurities inside the gap, other places feel not important, but in fact, cleaning is not only the bottom of the gap, the whole gap should be cleaned, including both sides of the gap, the surface of the gap and the dust inside the gap. If it is not cleaned, it will directly affect the adhesion of the tile grout, and also affect the curing effect.

2. Affix the masking tape: as long as the ceramic tile surface is not smooth, need to affix the masking tape or wax, do a good job of protective measures. Otherwise, the tile grout will stick firmly on the ceramic tile, cleaning up will be more troublesome. If the joints cannot be when will damage the ceramic tile.

3. Premix treatment: the new rubber hose cannot be directly glued, to hit about 60cm of unmixed material. This section of tile grout is not completely mixed evenly, into the gap will not solidify, so it cannot be used.

4. Fill pressure gap: some owners feel good after glue, is not ready to pressure gap, until the shovel glue found that it cannot shovel up, can only allow the gap to bulge up. In fact, the pressing gap is not only to compact the sealant, so that the tile grout can fit the ceramic tile gap, or to press the excess tile grout out of the gap, break the contact, and facilitate the shovel glue. It must not be ignored.

5. Remember to tear the masking tape: for tiles with the masking tape, the glue shovel time is different. You can tear the masking tape after 10 minutes of pressing, and do not tear until the tile grout is dry. The dry tile grout is very hard, and the adhesion is very strong, and the masking tape will become hard, and it is difficult to tear.