The tile grout the effect is good, with tile shop affixed has very big relationship

The quality of the effect of the tile grout is not only related to the advantages and disadvantages of the tile grout products and the skill level of the tile grout division, but also has a great relationship with the tile shop paste. Let's take a look at it in detail from Kelin epoxy gap filler manufacturer.

1. Paving must leave a reasonable size of the gap
Although the tile joint is a material with stable physical properties, the temperature is high and the temperature change is large enough to make the tile and the adhesive material expand. Once the tile joint is too small to extend the support force, the empty drum and collapse Angle will appear between the tiles because of the phase squeezing, and the serious words will also lead to falling off. Usually 1.5 to 2.0 gaps can be reserved.

2. The grass-roots treatment should be standardized
Wall ground base treatment is very important work, a little attention will affect the bonding effect. Before laying, the base must be handled clean, to ensure that all kinds of dirt, plastering are removed, otherwise the moisture of cement mortar will be absorbed by dust and other sediments, leading to tile adhesion is not firm. In addition, whether the grass-roots level, the new wall ground is empty drum cracking, etc., are to pay attention to the details.

3. Beware of artificial tile scratches
If the residual gravel on the tile, the foot is prone to scratches, and the construction site often appears small stone sand and other decoration garbage, so we must pay attention to the location of the tile. In addition, the paved ceramic tile should also pay attention to good protection (packing box paper), to avoid dragging heavy construction equipment, tools produced scratches.

4. Smear ceramic tile glue to be uniform
A lot of people in basic level daub ceramic tile glue can use scraper back and forth daub scrape, turning place shows radian turn. This technique will lead to tile glue dentate is not straight, uneven density, resulting in tile glue and tile between the combination of small area, weak adhesion relay, easy to drop tiles. Correct way should be in horizontal base surface, scrape ceramic tile glue evenly with tooth into tooth shape.

5. Internal and external careful corner collapse

The position of the corner of internal and external is usually to grind the coner of the ceramic tile. If the operation is improper, the anti-cracking performance of the edge part of the ceramic tile will be weakened, and the porcelain will crack and collapse Angle in the late stage.