What should be paid attention to in sealant construction?

The following is the construction precautions of Kelin tile grout supplier:

1.Before the construction of the ceramic tile seam, remember to clean up the hygiene, sewing and tile cleaning is essential, otherwise it will directly affect the construction effect.

2. When the construction temperature is lower than 15°, it is recommended to soak the sealant in hot water for more than 10 minutes before using it.

3. If the construction of wood grain brick and antique brick must be waxed before construction, otherwise the shovel side may damage the ceramic tile.

4. It is not recommended to use the first 40cm-60cm material in the mixing tube at the beginning of construction, in order to avoid the phenomenon of poor mixing and poor construction effect.

5. There is water or damp in the gap of ceramic tile, please do not sew the construction. Please dry the gap with a hot fan or wait for the water in the gap to volatilize naturally and then do the tile adhesive.

6. Hit the perfect seam agent, such as 24 hours of sealant dry before removing the residual material

7. The construction of the epoxy brick adhesive shall not be wet within three days.

8.Cover the unused sealant with a lid, and change a mixing tube when needed.

9. In the construction, do not use sharp things to poke, do not use strong acid products, otherwise it will destroy the effect of sealant.

10.Beauty seam construction should be paid attention to before the door of the furniture, because in this way, when moving the furniture, it will not destroy the effect of beauty seam agent.

11.In contact, wear rubber gloves, so as not to affect health.Keep the product out of reach of children.