What is the difference between waterborne epoxy adhesive and two component adhesive?

The products of Kelin tile grout supplier include waterborne epoxy adhesive and two component adhesive. In order to let you fully understand the difference between the two, I give you a comparison from the following aspects:

1. Composition

Barreled waterborne epoxy adhesive: epoxy resin as the main material, adding large particles of glass color sand, belongs to the water-based environmental protection products;

Two component adhesive: by high-tech new polymer (mainly epoxy resin) and high-grade pigment composition, divided into water and oil products.

2. Usage

Barreled waterborne epoxy adhesive: clean the gap before use, mix AB two groups of materials, manually mix them evenly and then wipe them on the tile, then scrape the seam, and then clean the excess epoxy colored sand on the surface with clean water, and finally wait for curing.

Two component adhesive: clean up the gap before use, and release the colloid about 40cm-60cm from the front end of the hose to ensure that the glue at the back is evenly mixed.Then the colloid is hit in the gap, and then the pressure can be carried out, and the glue can be shoveled after the solidification of the seam.

3. Finished product effect

Barreled waterborne epoxy adhesive: very hard after curing, pigment particles are larger, the finished product is frosted texture, looks low-key luxury, very suitable for antique wood grain tiles;

Two component adhesive: the color is delicate, very hard after curing, the surface is smooth, and the stains can be wiped off directly.

4. Advantages

Barreled epoxy colored sand: simple to use, time and effort saving, super adhesion, convenient cleaning, longer life, more cost-effective price;

Double tube sealant: waterproof, mildew and permeable, rich in color, strong adhesion, very convenient cleaning, can be cleaned together with ceramic tile.

5. Shortcomings

Barreled epoxy colored sand: it is laborious to stir by hand. The colored sand that has been evenly stirred needs to be used up within the specified time and cannot be left for next use, but the unstirred can be used;The time of complete curing is longer, and the cleaning after curing will be more troublesome than the sealant.

Double tube sealant: the construction is more complicated. If there is clear water during curing, it is easy to swell up and dry up.It is necessary to clean up the gap and not leave dust and water stains, otherwise it is easy to cause the sealant to fall off; Rough tiles need to be covered with fine paper.

As can be seen from the above points,  waterborne epoxy adhesive and two component adhesive have their own characteristics, and which product is better to use depends on the needs of the owner. Kelin epoxy gap filler manufacturer reminds you that the most important thing is to choose the product you like. Do you prefer waterborne epoxy adhesive and two component adhesive?