Teach you how to avoid tile grout burst pipe

The construction of the grouting looks simple, but sometimes there will be a lot of thorny problems, such as the tile grout burst pipe. Kelin epoxy grout supplier takes you to know the reason for the tube explosion and how to avoid the tube explosion of tile grout.

1. The temperature is too high in summer
When construction in summer, many sewing masters are also used to putting tile grout in the trunk of the car. Because the summer temperature is high, the temperature in the trunk is more like a furnace. If the tile grout is just taken out of the trunk and started to glue, then the material is hot and thin, and the glue will leak glue and burst the tube. If the tile grout is exposed to the sun, the tube will undoubtedly burst. Therefore, the material should be cooled before gluing, and stored in a cool and dry place daily.

2. The temperature is too low in winter
If the temperature is too low in winter, it will also lead to tube explosion. The lower the temperature, the more thick the ceramic tile grout colloid will be, and it is more difficult to play. If the glue gun is forced to press the glue, the colloid will be directly exploded under pressure. In winter, it is recommended to first soak in hot water at about 50 degrees for 10-15 minutes, and then carry out construction when the colloid becomes thin.

3. Loose hose piston
There are two pistons at the bottom of the tile grout bottle, here is to make sure that the colloid does not leak out. If the piston at the bottom is loose, the colloid will leak out from the bottom when gluing, and the tube will burst if the operation is not good. Therefore, before glue is changed to check the bottom of the colloid, check whether the piston is intact, and whether the amount of material used on both sides is consistent.

4. Improper operation of glue gun
The glue gun is divided into electric glue gun and manual glue gun. The manual glue gun will be more laborious to glue by itself. The electric glue gun saves time and effort. When using the glue gun, if the operation is improper, the glue gun is pressed too fast, the pressure is increased, but the glue speed cannot keep up, which will lead to the direct tube explosion of the tile grout. So in the glue, the pressure speed is changed to slow, a pressure and a release can also be smooth glue.