Home > News > INDUSTRY NEWS > Save time and effort of the tile grout project
Certifications
Follow us

Save time and effort of the tile grout project

Save time and effort of the tile grout project

2021-12-10 15:44:50

It was originally the work of professional sewing masters. With the gradual popularization of sewing agent, many owners can also carry out construction by themselves. But there are also owners reflect that they are very tired to do perfect sewing. In fact, there are tricks to make beautiful joints. As long as you master these construction tricks, it will naturally save time and effort in construction.

 


 

First, how to quickly clear the gap

Do not underestimate this work, only the early clean up, the late construction can be carried out smoothly. But the gap width in everyone's home is different, how should clear quickly clean?If the gap is too small, choose art blade and grey knife. If the gap is too large, you can use slot cutter and slot cleaning cone.The filling inside the gap is cleaned up, the most important is the dust on both sides of the gap, can be cleaned up with brush, vacuum cleaner.

 



 

Two, avoid gluing too tired

In the process of sewing, it is quite laborious to glue, and the arm will feel sore if it is too long.If you want to avoid the situation of too tired glue, you can use electric glue gun, but the price will be more expensive, conditional can be rented.Glue tired may also be because the hand holding glue gun for too long, in the construction of time do not rush, glue must have a regular rest, relax the arm muscles.

 




 

Three, the tile grout is difficult to glue

Due to climate, the viscosity of sealant will have an impact.If the temperature is low, it is difficult to glue the sealant, you can soak the sealant in 70℃ hot water for about 10 minutes, so that the glue is easier.When it is summer, we must avoid the sealant under the sun exposure, so that the sealant is too thin glue will not be controlled, it is difficult.

 


 

Four, the colloid mixing is not uniform

The two-component sealant should be mixed through the rubber hose before use. The 40cm-60cm of the front end of each group of new sealant is not evenly mixed, so it needs to be discarded.If the sealant in the gap is not evenly mixed, it may be because the glue speed is too fast. Can adjust the gluing way, according to the gap to slowly sizing.

 


 

Five, the correct gluing sequence

If both the wall and the ground want to do the tile gap filler, generally speaking, it is to do the wall first and then the ground.This can avoid trampling the ground during construction.Glue can be in accordance with a certain order, such as the first horizontal seam after the vertical seam, to avoid repeating the gap.

Although the construction of sealant looks difficult, it can be successfully completed as long as the skills are mastered.Hope to help every owner to do beauty seam easily, save more time and effort.