How to clean the sealant without curing?

There are many reasons for non-curing of tile grout. The external reason may be that the construction workers did not throw away the initial 40-60cm mixture after cutting the nozzle, resulting in uneven mixing of the two raw materials and thus non-curing. Or the workers' construction technique is not good, resulting in the sealant does not cure.The internal reason is that the raw material is too thin to reach the degree of curing.So how can we clean up the sealant that is not cured?

1, if you want to clean up the tile grout that cannot be cured, you can use a spatula to scrape out the sealant inside the gap a little bit, and in the process of scraping, we must be careful not to scratch the tile. If there is no shovel knife in the home, you can also choose to use the beauty sewing knife or art knife to replace.

2, if the sealant has been solidified, it is generally very hard and difficult to remove. If you want to clean the solidified sealant, you should use a hot air gun to blow the solidified sealant soft, and then use a shovel to shovel out the sealant a little.If there is no hot air gun in the home, a hair dryer can be used instead.

Kelin epoxy gap filler manufacturer tip: the above is the cleaning method of non-curing sealant. Generally speaking, this situation is very rare. Even if it occurs, the workers of kelin grout pen tile supplier construction team will find problems in time, and the after-sales service is very in place.