Does the toilet want to do beautiful seam

Home decoration is inevitable to use ceramic tiles, ceramic tile seam has become a must do in the decoration of a project. Beauty seam agent is not only practical, beautiful effect is good, can avoid the dirt produced in life caught in the ceramic tile gap, a long time will become more dirty, but also easy to breed bacteria affect health. So in the bathroom, are we going to do beautiful seams?

China Kelin porcelain seam an agent manufacturer reminds you: the toilet needs to do beautiful seams!

Bathrooms are often damp, and we don't leave the windows open all the time to ventilate when we go to work, let alone the bathroom without window. Ceramic tile seams can effectively solve the problems of blackening, shedding, odor and so on between the cracks of ceramic tiles. The beauty seam will leave a layer of protective film in the cracks of ceramic tiles, which can play the effect of waterproof, mildew proof and antifouling. If the decoration budget is also possible, the bathroom to do the beauty seam!

After the completion of the tile, the cement ash layer can be done after three or four days of drying, or it can be done at the end of the hard installation. You need to clean all the dirty things between the cracks of the tiles before you make the seams. It is best to do it after the completion of the tile. If you wait until all the decoration is completed, you can do the seams again. The dirt in the cracks will be more and it is not easy to clean.

There are several points that need to be paid attention to

The beauty seam is only a result of sewing, with a little better pointing agent can also achieve the effect of pointing.The effect and practicality of beauty seam must be seen as whether the basic work has been done well before. If the basic work has not been done well, then the big brand of beauty sewing agent will not have a good effect. China Kelin constructiong building glue wholesaler has  its own construction team will help the customer to do the work.

Before making the joint, it is necessary to understand the moisture content of the construction environment.Toilet must be waterproof, but once done waterproof, the water is not to go away, whether it is to air time longer, or through the whole summer.

We need to remove the moisture before making the seams to ensure the quality of the seams.Did not do waterproof, it is sitting room and bedroom, these ground it will not store water, but the first floor except. The reason for the removal of water is because many tile grout materials do not dissolve water. If the moisture content is too high, it will be bad in the later period and have to be redone. Therefore, Kelin tile grout manufacturer will confirm with the customer for the construction environment in order to recommend the right product.