Can tile grout be redone?

It is very normal to do the first time not well, not how good the professional sewing master can do, but it does not matter, the first time did not do it well is practice, can also do it again, but the rework is more troublesome, to waste a lot of material. The professional construction team of Kelin tile grout manufacturer reminds us to remember the following points when reworking:

One, in the process of the construction joints found the tile grout is not done yet, use clean sewing knife didn't do a good job in the beauty seam an agent to dig out, back glue, pressed again seam, the tile grout in the construction process has not yet been solidified, the tile grout is soft, use clean sewing knife to dig out the tile grout is also easier. If the sealant is deducted in the curing process, it is more time-consuming.

Two, if it is already cured sealant, then only to prepare professional rework tools, 1600 watts of heat gun, a shovel knife. Blow the sealant that needs to be reworked with a heat gun. In the front hand, blow the sealant with a heat gun and blow it soft. In the back hand, hold a spade knife and push it forward along the sealant behind the heat gun.

Three, remember to clean the gap, especially the reworked ceramic tile gap, to clean clean, there can be no residual sealant in the gap, including the edge of the ceramic tile gap, otherwise there will be particles resulting in the uneven surface of sealant.Although the technical content of tile grout is not high, it is a careful work, which requires enough patience, confidence and carefulness. Only with concentration can we do the American sewing well, and only with concentration can we be professional.

Four, clean up the seam an agent, must wait to blow the seam an agent soft scraper, don't use strong shovel, more don't blow the hot air gun at a place for a long time, the ceramic tile aperture will become fragile because of heat gun baked for a long time, to use the shovel to clean up the seam an agent, the ceramic tile aperture easily collapsed, if is home to the customer rework, ruining the ceramic tile, not only don't get the money,but also the owner should be compensated for the loss, which is so easy for a novice to make such a fatal mistake that the gain is not worth the loss.

Five, the strength to notice when the seam an agent, even is the key to his grip on the glue guns, hit the seam an agent is glue gun hand strength wants even, with the dynamic pressure glue guns don't use all one's strength, uniform strength of the seam is uniform, and more to save materials, saw many beginners to play the seam an agent, more than a lot of, little place and not enough, such beautiful seam an agent is a waste of sealant.Although there is no technical content in sewing, there are a lot of skills. At the same price and with the same material, a professional master can make money, while an unprofessional one will lose money. This is the difference.For the last time, pay attention to observe when pressing the seam, look at the edge of the seam pressure, see no good pressure of the beautiful seam immediately again, after pressing all the beautiful seam, and then carefully check all the beautiful seam, to see whether all the beautiful seam are pressed, smooth and smooth without particles of the beautiful seam is done.