Beauty sewing construction use tile adhesive paper or sealant wax

Ceramic tile seam has always been looking at the final curing effect. Before, we have introduced the tools used in construction, and mentioned the paper and wax. Today, we take them out separately for comparison, hoping that the owner and the relevant personnel who will contact the seam can understand the difference.

Two-component sealant according to different construction methods and tools, there are two main methods:

1, the use of seam wax

After cleaning the gap, put a layer of seam wax on the edge of the gap, and then glue, to prevent the curing of seam glue is not good to clean;The construction of wax is simple, without too much labor and time waste, and can be applied to a variety of ceramic tile types, is the first choice for the construction of sewing agent workers.

2. Use fine paper

After cleaning the gap, paste the beauty grain paper on the edge of the gap, hit the perfect seam agent and then press the seam, you can directly tear the beauty grain paper, do not have to use a shovel knife a little shovel material.

If you use beauty seam wax, a box of united seam wax evenly spread, 100 square meters of house is fully enough, and even a lot of surplus, and easy to operate;However, the use of us grain paper needs to be carefully pasted on both sides of the gap, which needs to be careful. It is troublesome to operate and wastes time, and also wastes us grain paper, which increases the cost.

So now most of the construction is the use of beauty seam wax, but if the new construction, often deal with the Yin Angle and Yang Angle, at this time the use of beauty grain paper can play an auxiliary role, to make the effect will be better.If there are any questions about the construction, you can contact Kelin tile grout supplier at any time.