Be careful of high temperature for sewing

There are many workers to exchange experience with the construction team of Kelin Beauty Joint, saying that there will be some problems in the construction of him very troubled.For example, in the gap between the wall and the ground, there are colloid collapse, flow hanging and other problems, the construction progress is slow and the owner complained, what is the reason?

How did the sealant collapse?

The collapse of sealant after construction is generally caused by inadequate gluing. This problem is particularly obvious in some self-gluing owners.Due to the lack of skilled gluing skills, many novices only play a thin layer of sealant on the surface of the ceramic tile gap, which will lead to material collapse in the later period.

More importantly, because the material is not full, it will lead to the late can not be pressed.It is impossible to show the real effect of sealant.

How did the sealant burst?

High temperature in summer, construction personnel try not to put the ceramic seam agent material in the trunk of the vehicle or open exposure, otherwise it is easy to cause high temperature tube burst. When gluing, uniform gluing is used. It is not suitable to gluing too fast, which is also one of the reasons for tube bursting.

So the construction workers should remember, avoid high temperature storage, at the same time to use within the expiration date.

How can tile grout flow?

Seam sealant is an epoxy-based resin product, and the viscosity of resin materials will be affected by temperature. In general, the higher the temperature, the lower the viscosity of sealant, which will affect the performance of sealant.

In construction, the glue feel will be lighter, that is, the extrusion force will be smaller, but the anti-hanging performance will also be reduced. Therefore, when the temperature at the construction site exceeds 30 ° C, it is not recommended to apply glue.