Dehumidification tips before the construction of tile grout
Now the most commonly tile grout on the market is epoxy resin, but it is particularly sensitive to water molecules. If there is water or the environment is wet during grouting, the tile grout will turn white or even not solidified. So you must check whether the ceramic tile joint is dry before construction . How to do if the ceramic tile joint has water? How to dehumidify the tile grout before construction? In fact, the method is very simple, Kelin construction building glue supplier will teach you.
Just spread good ceramic tile cannot grout, because ceramic tile is not completely dry, there is moisture inside gap. Construction can be done after a week below ordinary circumstance, how can then ability know to do after all? Can plug paper towel to ceramic tile gap inside, see whether it can keep dry, if not change then can be constructed.
No matter the ceramic tile is new installed or not, you have to check whether satisfy construction condition. If there is water residue on the ground before grouting, and is urgent construction, it is necessary to confirm whether it is leaking or seepage. If it is simply sprinkling or not cleaned up after using, then you can use air conditioning, floor heating, dryer, hair dryer to dry the base surface, to ensure that the construction of the tile grout after drying. If due to the weather reasons, such as rain and snow weather or indoor and outdoor temperature difference is large, resulting in indoor humidity, you can close doors and Windows in advance, and wait for the weather to be fine before construction, or you can use air conditioning, floor heating, hot air gun, dryer, hair dryer to dry the base surface, to ensure that the construction of the tile grout after drying.
Here to remind everyone, before grouting must keep the indoor dry and sanitary, with no special circumstances, must not construct in the indoor where did not meet the construction condition.